|
OIME 1500HP Drilling Rig
Click on Above Images for Larger Viewing
***SOLD SOLD SOLD***
OIME 1500hp Drilling Rig
Call for Pricing & Offers
2006 Refurbished – Good Condition
Trustee is accepting bids, HUGE Discounts
Located in New Zealand
Call NOW! (800) 952-1973
Click on Above Images for Larger Viewing
1 Primary Rig Inventory
1.1 General
The items listed below describe in limited detail the major and important features of Rig 120. It is not intended to be a comprehensive or complete inventory of what is included with this rig. More information and details can be provided by referring to the contact person in section 6.
1.2 Rig
|
Drawworks |
|
|
Make and Type
Rated Capacity
Drive type
Auxiliary Brake
Minimum Input HP
Drum Size
Catwork and catheads
Hoisting Capacity
Crown Block Safety Device |
OIME SL-1500
900,000 lb
Mechanical with 3 x Caterpillar D-3412 engines
Parmac Model 481 hydromatic
1500 HP
27” x 50”
Foster model 16-L (Make up ), Foster 16-LB (Break out )
900,000 lb with 1-3/8” drilling line & 12 lines
Foster type 238 |
|
Mast |
|
|
Make and Type
Mast height
Maximum Rated Static Hook Load.
Hook load rating
Adjustable stabbing board
Crown Block – Type
Crown Block Sheaves Number/Size
Crown Block Fast Line Sheave Size
Rating |
Parco Cantilever / Split level
142 ft. (handles triples per stand)
1,050,000 lbs
1,050,000 lbs With 12 Lines EEIPS
Yes
Parco
6 x 50”
60”
1,050,000 lbs, 5000 m with 5” drill pipe or
6000 m with 3-1/2” drill pipe |
|
Mast Substructure |
|
|
Make and type
Height under Rotary Beams
Nominal Height
Max. Set-back Load, (lbs.) |
Parco Split level
6.40 m
8.45 m (with skid rails)
682,500 lbs & 1,125,000 lbs simultaneous with hook and set-back |
|
Travelling Assembly |
|
|
Block, Type and Rating
Block Sheave Number, Size
Hook, Type and Rating |
Gardner Denver 400 Ton
6 x 60
BJ Hydrahook 1509 |
|
Rotary Table and Equipment |
|
|
Make and type
Rotary beam Opening
Drive
Maximum Input HP (at 125 RPM) |
Gardner Denver 27-1/2”
38”
Catworks Engine Cat D-3412
600 HP |
Transmissions |
|
|
Manufacture
Model |
Allison
6032 |
1.3 Winches
|
Rig Floor Winches |
|
|
Number
Model and type
Year of manufacture
Location |
2
Yantai air operated winches/ 6000 lb
2005
Rig floor |
|
Man Rider Winch |
|
|
Number
Model and type
Year of manufacture
Location |
1
Ingersol Rand Model FA2B-GMR-13MK1G (4000#) air operated
2005
Rig floor, driller and off driller side |
|
Monkey Board Winch |
|
|
Number
Model and type
Year of manufacture |
1
Ingersol Rand PS2-1000R-PH2M Winchpullstar 2200# with 2 meter pendant, air operated
2005 |
|
BOP Handling System |
|
|
Number
Model and type
Rails and trolley system
Year of manufacture
BOP lifting frames |
2
Ingersoll Rand BHS40MA6-30-30-4, 80,000 lb capacity, 2 hoists, each 40,000lb capacity, air operated roll and hoist. Each winch with independent control pendant
Each rail rated to hold 80,000 lb
2005
Designed and fabricated for safe lifting of complete BOP stack, one set for 21-1/4” BOP and one for 13-5/8” stack |
1.4 Top Drive
|
Top Drive |
|
|
Manufacturer
Manufactured
Model
Type
Features |
Tesco Corporation
Calgary, December 2005
HCI 1205 HP 500 ton
Hydraulic
Weight (approximate) 12,300 lb,
Operating Length 4.36m (including 9' links and elevators)
Max. Torque (2.76:1 gear ratio) 54,000 ft-lb
Max. Speed (2.76:1 gear ratio) 200 rpm
Quill ID 76mm |
|
Top Drive Power Unit |
|
|
Hydraulic Unit
Prime mover |
Hydraulic Power Unit skid carries service loop on storage reel. Complete with closed loop, open loop auxiliary hoses, and multi-conductor for robotics.
Configured with 4 x 2”x 225ft hose assemblies for the closed loop circuit
Detroit Diesel 16V2000, 1205 HP at 2,100 rpm diesel engine |
1.5 Power System
|
Generator |
|
|
Number
Make and Type
Year of Manufacture
Prime Mover
Output each unit |
2
Marathon
2005
Reconditioned Caterpillar D3412 diesel engine
470 kW Continuous/ 505 kW each unit |
1.6 Mud Pumps
|
Pump |
|
|
Number
Make and Type
Year of Manufacture
Input horsepower
Liner sizes available
Prime Mover
Drive system |
2
F-1300 model, Chinese built equivalent to Continental Emsco F-1300 triplex
2005
1300
7”, 6.5”, 6”
Caterpillar Rebuilt D-399 Caterpillar Diesel Engines
30” Dual Fawick Dual Clutch Drum and belt drive |
1.7 Tank System
|
Shale Shaker Linear |
|
|
Number
Make and Type
Max flowrate (GPM) |
3
Derrick, linear motion L48
500 gpm |
|
Desander |
|
|
Make and Type |
Harrisburg 2 x 10” |
|
Desilter |
|
|
Make and Type
No. of cones – sizes |
Harrisburg 12 x 4”
12 x 4” |
|
Shaker Tank |
|
|
Manufactured
Capacities
Other |
Houston, August 2005
Sand Trap 58.6 bbls, Desander compartment 68.8 bbls, Desilter compartment 68.8 bbls, Settling #1 260 bbls
Derrickman’s house with wash basin and AOI DAC unit |
|
Intermediate Tank |
|
|
Manufactured
Capacities
|
Houston, August 2005
Settling #2 80.8 bbls, Intermediate #1 201.6 bbls, Intermediate #2 275.2 bbls |
|
Suction Tank |
|
|
Manufactured
Capacities
No and Type of hoppers |
Houston, August 2005
Suction #1 234.2 bbls, Suction #2 236.5 bbls, Pill 77.2 bbls
2 x Geolograph Pioneer sidewinder type |
Water Tank #1 |
|
|
Manufactured
Capacity
Centrifugal pumps |
|
